{"product_id":"cartek-battery-isolator-gt","title":"CARTEK BATTERY ISOLATOR GT","description":"\u003cp\u003e\u003cspan\u003eThe GT Battery Isolator is suitable for almost all race and rally car applications. Incorporating 600A battery isolation and fully protected 40A power output for connection to ECU, coils or Ignition switch\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFully electronic with no moving parts\u003c\/li\u003e\n\u003cli\u003eTotally sealed against water and dirt\u003c\/li\u003e\n\u003cli\u003eCompletely resistant to shock and vibration\u003c\/li\u003e\n\u003cli\u003eFully integrated with built in alternator run-down circuitry – No extra components required\u003c\/li\u003e\n\u003cli\u003eDriver operation by a single internal ON-OFF button\/switch\u003c\/li\u003e\n\u003cli\u003eExternal operation by single or multiple ‘strike’ button(s)\u003c\/li\u003e\n\u003cli\u003eButtons \/ switches connected to Isolator using light weight wiring\u003c\/li\u003e\n\u003cli\u003eMounts close to battery for reduced cabling\u003c\/li\u003e\n\u003cli\u003eVery small and weighs just 120g\u003c\/li\u003e\n\u003cli\u003eDesigned and manufactured in UK using high quality components\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"et_pb_column et_pb_column_1_3 et_pb_column_5  et_pb_css_mix_blend_mode_passthrough\"\u003e\n\u003cdiv class=\"et_pb_module et_pb_blurb et_pb_blurb_0  et_pb_text_align_center  et_pb_blurb_position_top et_pb_bg_layout_light\"\u003e\n\u003cdiv class=\"et_pb_blurb_content\"\u003e\n\u003cdiv class=\"et_pb_blurb_container\"\u003e\n\u003ch4 class=\"et_pb_module_header\"\u003e\u003cspan\u003eHow it works\u003c\/span\u003e\u003c\/h4\u003e\n\u003cdiv class=\"et_pb_blurb_description\"\u003e\n\u003cp\u003eAll CARTEK Battery Isolators are designed to perform two functions in accordance with FiA motorsport safety regulations. These are:\u003c\/p\u003e\n\u003cp\u003e1) Stop the Engine from running, ‘Kill’.\u003cbr\u003e2) Disconnect the Battery from ALL electrical systems, ‘Isolate’.\u003c\/p\u003e\n\u003cp\u003eThe ‘Engine Stop’ function is implemented by disconnecting power to the ECU or Ignition circuit – forcing the engine to stop and electrical power generation by the alternator\/generator to cease.\u003cbr\u003eThe ‘Battery Isolation’ function is implemented by disconnecting the negative side of the vehicle’s battery from chassis\/ground, thereby disconnecting the battery from ALL of the car’s electrical systems.\u003cbr\u003eWhen activated, the Engine Stop function occurs a very short period of time before Battery Isolation. Alternator load dump protection is also built in so no additional components are needed.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"et_pb_column et_pb_column_1_3 et_pb_column_6  et_pb_css_mix_blend_mode_passthrough\"\u003e\n\u003cdiv class=\"et_pb_module et_pb_blurb et_pb_blurb_1  et_pb_text_align_center  et_pb_blurb_position_top et_pb_bg_layout_light\"\u003e\n\u003cdiv class=\"et_pb_blurb_content\"\u003e\n\u003cdiv class=\"et_pb_blurb_container\"\u003e\n\u003ch4 class=\"et_pb_module_header\"\u003e\u003cspan\u003eUser operation\u003c\/span\u003e\u003c\/h4\u003e\n\u003cdiv class=\"et_pb_blurb_description\"\u003e\n\u003cp\u003eAll CARTEK Battery Isolators are operated using two switches: A dashboard mounted ‘Internal Switch’ allows the driver to turn the Battery Isolator ON and OFF. An ‘External Switch’ is for operation by safety personnel in an emergency situation. The Internal Switch can be used to turn the Battery Isolator ON and OFF, however the External Switch can only turn the Battery Isolator OFF. This is in accordance with Motorsport UK safety regulations.\u003c\/p\u003e\n\u003cp\u003eAll CARTEK Battery Isolators also shut down automatically if a fault is detected such as short-circuit, over-current, over-temperature or broken cable connections. If this happens then the LED on the Battery Isolator unit, and the CARTEK Internal Switch, will display a flash pattern to indicate the cause of the fault. Refer to user manual for fault diagnosis. \u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Midnight Motorsport","offers":[{"title":"Default Title","offer_id":54673379721557,"sku":null,"price":295.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0920\/1942\/5621\/files\/CK-BG-06-B_GTX.jpg?v=1786973903","url":"https:\/\/www.midnightmotorsport.co.uk\/products\/cartek-battery-isolator-gt","provider":"Midnight Motorsport","version":"1.0","type":"link"}