Rallying Codriver Navigator Roamer Lite-C – The very unique Cordless LED illuminated map magnifier POTI
Rallying Codriver Navigator Roamer Lite-C – The very unique Cordless LED illuminated map magnifier POTI
Couldn't load pickup availability
Product Information:
The very unique Roamer Lite-C
Following on from the successful Roamer Lite-B, our very unique Roamer Lite-C (Cordless) LED illuminated map magnifier has, (as many would testify!) been a long time in the design stage.
It’s good to report that the major features of the Roamer Lite-B have been carried over, specifically the ergonomic moulding, hand/hook strap and the brightness control.
Roamer Lite-C is the first map magnifier of its kind to “go cordless”. Complete freedom of use.
No more worrying about an adapter or special wiring connector when swapping vehicles. None are required!
Plot in the warmth of the start venue whilst having your “Poti” at hand for those hard to see junctions.
Use the “C” during table top events, use the “C” anywhere!
What if my batteries fail?
Roamer Lite-C is designed to run for typically 10/12 hours continuous use(*)
Using state of the art electronics the on-board processor senses when the main LED’s brightness is reducing and flashes the blue LED – but the LED brightness will be more than usable for several more hours
The change-over time for exhausted batteries is minimal and fuss free by using the holder mounted directly to the case.
A spare battery cartridge is available as an accessory so you could even stock a “loaded” cartridge for a super quick change… less than 10 seconds!
Why is Roamer Lite-C not a rechargeable item?
Imagine you just forgot to recharge or ran out of time to charge your “C”… it’s back to the cable variety for you!
If the batteries are allowed to drop real low, it’s just a few seconds change over and you are good to go.
Can I use rechargeable AA batteries in Roamer Lite-C ?
Yes you can – the circuitry has been designed to operate with virtually no degradation on the slightly lower voltage from rechargeable batteries.
Can I switch Roamer Lite-C off?
Effectively yes. Turning the brightness down to minimum (fully counter-clockwise) makes the Roamer Lite-C “go to sleep” – but it “wakes up” several times a second to check if you’ve decided to turn the illumination back on again! The batteries will last many weeks in this “sleep” condition while the Roamer Lite-C is in your Nav bag awaiting its next outing!
Specification includes:
Ergonomic design.
Designed so that the adjustable strap forms your hand into the curve of the polypropylene body.
Can be utilised for left or right hand use by simply swapping the adjustable strap to the opposite side of the unit.
Magnification is totally equal across the entire 100mm/360 degree viewing area.
Unique driver’s “anti-glare” system
The driver will be aware of how little reflected “backlight” is produced due to the unique sleeve separating the light source from the top of the unit.
State of the art illumination control with intelligence!
A fine feel potentiometer (dimmer control) allows smooth min to max illumination.
However, the first 10% of travel means that Roamer Lite-C is in “sleep” mode and it “wakes up” several times a second to check if you’ve decided to turn the illumination back on again.
The blue LED will pulse during this “sleep” period just to let you know all is well. The batteries will last many weeks in this “sleep” condition whilst RoamerLite-C is packed away.
Comes complete with an adjustable handle and hanging strap
Doubles as a hanging device and a fully adjustable hand steady.
Comes complete with its own drawstring carry bag
Enables you to keep RoamerLite-C safe when not in use.
Extremely low current consumption
Due to the use of the latest high intensity white LEDs, the current drain is minimal and RoamerLite-C will run at maximum brightness for typically 10/12 hours continuous use (*)
RoamerLite-C uses all types of AA cell including rechargeable.
Low brightness warning
Using state of the art electronics the on-board processor senses when the brightness is reducing and flashes the blue LED
System check on battery insertion
The same blue LED will pulse 10 times after battery insertiion and pulse 5 times when the unit “wakes up” and turns on the main white LEDs.
These functions assure you that RoamerLite-C is well and ready to use
To be seen in the dark is to be believed!
(*) – single use or rechargeable batteries with around 2000mAH capacity are required for this, but these are commonly available, with many batteries (Duracell “copper tops”, Panasonic re-chargeables and even discount supermarket own brands etc) easily having higher capacities, meaning even longer use
Warning… comes alive in the dark!
Share
